tel.: +386 5 33 52 100
fax.: +386 5 30 01 558
info@stem.si
  Slovenščina  English (United Kingdom)  Deutsch (DE-CH-AT)  Polish (Poland)  Bulgarian (Български)  Russian (CIS)  Slovenčina (Slovenská republika)
 

STEM d.o.o.
Vipavska cesta 67
5000 Nova Gorica
Slovenia

tel.: +386 5 33 52 100
fax.: +386 5 30 01 558
e-mail: info@stem.si
http: www.stem.si

PLATES AND PROFILES SHOTBLASTING MACHINES TYPE “PAP” Print

PeskalniStrojPAP1.jpg“PAP” series shotblasting machines are designed for continuous blasting of plates and profiles, and also welded constructions. Special attention has been paid to the positioning of turbines that provide the optimum efficiency and uniform cleaning of work pieces.

Plates or profiles are loaded onto an input roller conveyor that transports work pieces through the tunnel part of the machine. On the outer brim of the tunnel’s shotblasting part, there are turbines that provide optimum cleaning of work pieces from the top and bottom side. Work pieces go on through the chamber for removing the shotblasting agent off the top surface, finally reaching the output roller conveyor.

  
CHARACTERISTICS:

  • PeskalniStrojPAP2.jpg“PAP” series shotblasting machines are designed for shotblasting plates of all standard widths and lengths, and they are also suited for blasting standard profiles of any dimension
  • Special machine variants also allow the shotblasting of welded constructions
  • “PAP” series machines provide continuous regulation of operating speed and, if required, also the regulation of steel shot flow
  • Shotblasting is turned on automatically, when work pieces travel under turbines
  • All machines are equipped by standard with a blow-off fan for removing steel shot from the top surface of work pieces, whereas in larger surface areas greater effect is achieved by using a rotation brush
  • There is a selection of machines available with different sizes of work space and with numerous optional accessories which allow us to adjust our machines to the needs of even the most demanding customer.
  • Due to quality and robust production, our machines are designed to operate in the most demanding environments, such as rolling mills, shipyards, etc.

 
LINES FOR THE APPLICATION OF PRIMER PAINT:

Shotblasting machines of “PAP” series may be upgraded into an automatic line for the application of primer paint; such line consists of:

  • hydraulic loading device
  • input roller conveyor
  • pre-drying chamber
  • shotblasting machine
  • automatic painting chamber
  • drying chamber
  • paint drying conveyor
  • output roller conveyor
  • hydraulic unloading device

In light of the needs of an individual customer, it is possible to select an individual assembly.

With the pre-drying chamber, moist layers on plate or profiles are dried, thus providing the subsequent procedure of shotblasting and primer painting.

From the painting chamber, the coated work piece goes on to the drying chamber, where it is dried to the point where it can be used for further technological treatment immediately after unloading.

In the final drying process, we can also use the already used thermal energy from the pre-drying chamber, thus reducing energy costs.

 

Copyright STEM d.o.o. 2011 - 2017 | Legal notice | web site production mkg.Creative

 
 





Message
  • Our website uses cookies. This improves your online experience and we can constantly improve the content.
    Do you agree with the use of cookies on our site?